Airtac Solenoid Valve 4V210-08, 1-4NPT, Single Solenoid, specify voltage

Normally in stock. Please contact us to confirm.
Product Code: SKU-00049
Brand: Airtac
Availability: In Stock
Download Product Details

Data Sheet 4V200-series
Rs. 5,574
Pneumatic Solenoid Valve Model: 4V21008BG 4, 5-2 way single Solenoid (No's) 1-4" Thread 24v DC With Coil & connector Make: AIRTAC

Function:


               This is a 5 ported 4 Way Directional Control Valve used to move cylinders or actuators.  Supply pressure must be supplied to the center port on the side of the valve with the 3 ports.  The outlet ports on the opposite side are connected to each side of a cylinder or actuator.  The pressure will hold the cylinder in one position while the other side of the cylinder is exhausted.  When voltage is applied to the solenoid end of the valve, the valve spool will shift causing air to go to the opposite side of the cylinder while exhausting the side that was pressurized.  This causes the cylinder to shift (or extend).  When the voltage is removed, a spring with an air assist will return the spool causing the cylinder to return to it's "at rest" position.  Mufflers may be added to the exhaust ports to quiet the air exhausting.  Adjustable Exhaust restrictors may be used to in the exhaust ports to control the speed of the cylinder.  If flow controls are used, they should always be placed in the lines between the cylinder and the outlet ports and control the air flow as it exhausts from the cylinder

Specifications:
          Media- Air (Minimum 40 micron filtration)
          No of positions and Ports- 2 Position, 5 Ports
          Flow- Cv=.78, Equivalent Orifice Area= 14 mm2, (36.6 cubic feet per minute at 80 PSI)
          Port Size- IN OUT = 1/4 NPT, Exhaust= 1/8" NPT
          Voltage range- plus or minus 10%
          Pressure Range- 24PSI min to 100 PSI Maximum
          Wire Insulation- Class F
No Specifications Found